Table of Contents
Advertisement
Figure 9. Displaying drive carrier assembly
Service personnel need fully assembled drive carrier assembly housing a drive filler to complete this
service procedure:
• Part number - 01LL731 (Drive Filler)
Figure 10. Displaying drive filler replacement kit
Refer to the following steps to remove and replace a drive filler:
1. Remove the drive filler.
a) Press the blue touchpoint to unlock the latching handle, as shown in Figure 11 on page 7. Unlock
the drive slot and release latch.
Figure 11. Unlocking the drive slot and release latch
b) Raise the handle and slide the drive filler out of the enclosure, as shown in Figure 12 on page 8.
Chapter 1. Servicing (customer tasks) 7
Advertisement
Table of Contents
