Polycom SoundStructure C16 Design Manual page 654

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
Command
get analog_gpio_value
"Analog Logic Pin"
A - 138
Description
This parameter gets or sets the value of the analog gpio pin. Writing an input
has no effect and returns the current value of the input. The value for this
parameter is an integer between analog_gpio_min and analog_gpio_max, inclu-
sive. Those parameters control how the analog value of the pin is mapped to
an integer range.
Examples
Response
val analog_gpio_value
"Analog Logic Pin" 0
digital_gpio_held
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
Event Source
Description
This parameter indicates when a digital input pin is held. It is similar in func-
tionality to the ir_key_held parameter. The hold time and repeat time are
specified by the digital_gpio_hold_time and digital_gpio_repeat_time parameters.
When the pin is held for the hold time, a status message will be generated. If
the pin remains held, status messages will be generated with a period equal to
the repeat time.
digital_gpio_hold_time
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
Description
Returns the analog voltage associated with the analog
logic pin "Analog Logic Pin". The logic pin "Analog Logic
Pin" must have been created with a vcdef command.
Argument value
Virtual Channel
Boolean
Read-Only
Digital General Purpose I/O Input
Control
Yes
Argument value
Virtual Channel
Integer
Read/Write
Digital General Purpose I/O Input
Control
Digital GPIO Pin held Status
Digital GPIO Pin Hold Time