Polycom SoundStructure C16 Design Manual page 627

Argument Argument value
Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Phys Chans Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
System Limits Minimum: 1.0, Maximum: 100.0, Resolution: 0.1
Default 10.0
User Limits No
Supported
Event Source No
Description
This parameter sets the ratio of the target gain applied by the limiter versus the
difference between the limiter threshold and the input signal level. For exam-
ple, if the limiter ratio is 10 (i.e., 10:1) and the input signal level is 6 dB above
the limiter threshold, the limiter applies -5.4 dB of gain.
dp_lim_thresh
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-Point
Read/Write Mode Read/Write
Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Phys Chans Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Virt Chans Mono, Stereo
System Limits Minimum: -100.0, Maximum: 0.0, Resolution: 0.1
Default 0.0
User Limits No
Supported
Event Source No
Command Protocol Reference Guide
Limiter Threshold
A - 111