Input Path Parameters - Polycom SoundStructure C16 Design Manual

Input Path Parameters

sig_gen_type
Argument Argument value
Channel Type Virtual Channel
Value Type List
Read/Write Mode Read/Write
Phys Chans Signal Generator
Virt Chans Mono
pink : Pink Noise (default)
white : White Noise
Values
tone : Sine Wave
sweep : Sine Wave Sweep
Event Source No
Description
This parameter sets the type of signal produced by the signal generator. The
options are pink noise (pink), white noise (white) a sine wave at a single fre-
quency (tone) and a sine wave swept across a range of frequencies (sweep).
cr_ungated_type
Argument Argument value
Channel Type Virtual Channel
Value Type List
Read/Write Mode Read/Write
Phys Chans Conferencing Mic/Line Input
Virt Chans Mono, Stereo
conf : Conferencing
sr : Sound Reinforcement
Values
line : Line Input (default)
bypass : Bypass
Event Source No
Command Protocol Reference Guide
Signal Generator Type
Select Processing For Ungated Signal
A - 127