Polycom SoundStructure C16 Design Manual page 548

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
Command
set line_out_gain
"Amplifier" -10
A - 32
line_out_gain
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
System Limits
Default
User Limits
Supported
Event Source
Description
This parameter sets the gain (in dB) of the line output.
Examples
Table 2:
Response
val line_out_gain
"Amplifier" -10
meter_peak_hold_mode
Argument
Channel Type
Value Type
Read/Write Mode
Values
Event Source
Argument value
Virtual Channel
Floating-Point
Read/Write
Conferencing Line Output, Sound Reinforcement Line
Output
Mono, Stereo
Minimum: -100.0, Maximum: 20.0, Resolution: 0.5
0.0
No
No
Description
Sets the line_out_gain on the output channel "Amplifier"
to -10dB.
Argument value
Global System
List
Read/Write
none : Peak Decay
hold : One Second Peak Hold (default)
reset : Infinite Peak Hold Until Reset
No
Line Output Gain
Meter Peak Hold Mode