Polycom SoundStructure C16 Design Manual page 560

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
Command
set
phone_auto_answer_en
"Phone In" 1
A - 44
Command
pstn_auto_hangup_loop_en
pstn_country
pstn_flash_delay_override
pstn_in_gain
pstn_line_voltage
pstn_loop_current
pstn_out_gain
phone_auto_answer_en
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
Default
Event Source
Description
This parameter enables (1) or disables (0) the auto-answer feature for the tele-
phony interface.
Examples
Response
val
phone_auto_answer_en
"Phone In" 1
Input channel
✔
Enable Auto-Answer For Telephony Interface
Argument value
Virtual Channel
Boolean
Read/Write
Analog Telephony Input
Mono
0
No
Description
Sets the phone associated with the virtual channel
"Phone In" to autoanswer when the phone rings. Note
that the phone in virtual channel name must be used, not
the phone output virtual channel name.
Output channel
✔
✔
✔
✔
✔
✔