Polycom SoundStructure C16 Design Manual page 266

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
9 - 36
4. Test logic inputs and events when working offline with SoundStructure
Studio.
Logic input pins may be forced to closed or open with
set digital_gpio_state "logic pin" 0 command to close a switch or
set digital_gpio_state "logic pin" 1 to open a switch. The name "logic pin" should
be replaced by the name of the pin you are testing.
5. Use the event enable/disable option if it is necessary to isolate and test indi-
vidual events
6. Select event names that are meaningful to make it easier to interpret the
event list