Polycom SoundStructure C16 Design Manual page 343

Hide thumbs Also See for SoundStructure C16:

Table of Contents

2. Left click on the desired SoundStructure device with the SoundStructure

VoIP Interface device as shown next. For SoundStructure system with

only one device, the device is already selected.

3. Next click on the Edit Devices Settings portion of the wiring page and

then click Edit Network Settings as shown next.

You can only set the Network Settings for the SoundStructure VoIP Interface when

working online. The VoIP settings are grayed out when the system is offline or

when the SoundStructure VoIP Interface is booting.

The Edit Network Settings dialog is divided into the following sections.

VoIP Network Settings to set the Ethernet parameters.

DHCP Boot Server Settings to determine how much information the

SoundStructure VoIP Interface will get from the DHCP server.

Provisioning Server Settings to manually configure the provisioning

server settings if the DHCP Boot Server settings are set to Static or the

Ethernet settings are set to Manual.

The SoundStructure VoIP Interface

Show Quick Links

Table of Contents

Troubleshooting