Polycom SoundStructure C16 Design Manual page 547

Command
set fader "Amplifier" 1
get fader "Amplifier"
set fader max "Amplifier"
10
set fader min "Amplifier"
-15
inc fader "Amplifier" 2
inc fader "Amplifier" 0.5
dec fader "Amplifier" 2.5
Argument
Phys Chans
Virt Chans
System Limits
Default
User Limits
Supported
Event Source
Description
This parameter sets the fader level (in dB) in the digital domain.
Examples
Table 1:
Response
val fader "Amplifier" 1
val fader "Amplifier" 1
val fader max "Amplifier"
10
val fader min "Amplifier"
-15
val fader "Amplifier" 3
val fader "Amplifier" 3.5
val fader "Amplifier" 1
Argument value
Conferencing Mic/Line Input, Conferencing Line Output,
Sound Reinforcement Mic/Line Input, Sound Reinforcement
Line Output, Analog Telephony Input, Analog Telephony
Output, Submix, ConferenceLink Aux Input, ConferenceLink
Aux Output
Mono, Stereo
Minimum: -100.0, Maximum: 20.0, Resolution: 0.1
0.0
Yes
Yes
Description
Sets the fader on the "Amplifier" virtual channel to 1.
Returns the current value of the fader on the "Amplifier"
virtual channel.
Sets the maximum fader value to +10 on the "Amplifier"
virtual channel. Any commands to set the fader above
+10 will have the value set to 10.
Sets the minimum fader value to -15 on the "Amplifier"
virtual channel. Any commands to set the fader below -15
will have the value set to -15.
Increments the current value of the fader by 2dB on the
"Amplifier" virtual channel and returns the current value
of the fader.
Increments the current value of the fader by 0.5dB on the
"Amplifier" virtual channel and returns the current value
of the fader.
Decrements the current value of the fader by 2.5dB on
the "Amplifier" virtual channel and returns the current
value of the fader.
Command Protocol Reference Guide
A - 31