Polycom SoundStructure C16 Design Manual page 558

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
Command
set matrix_mute "Table
Mic 1" "Phone Out" 1
get matrix_mute "Table
Mic 1" "Phone Out"
Command
set matrix_pan "Phone In"
"Amplifier" 1
A - 42
Examples
Response
val matrix_mute "Table
Mic 1" "Phone Out" 1
val matrix_mute "Table
Mic 1" "Phone Out" 1
matrix_pan
Argument
Channel Type
Value Type
Read/Write Mode
Row Phys Chans
Row Virt Chans
Col Phys Chans
Col Virt Chans
System Limits
Default
User Limits
Supported
Event Source
Description
The matrix_pan parameter is available at crosspoints where mono virtual chan-
nels are mixed to stereo virtual channels. The matrix_pan parameter provides
a way to control the amount of gain going to the left and right channels.
Examples
Response
val matrix_pan "Phone In"
"Amplifier" 1.000
Description
Mutes the crosspoint from input "Table Mic 1" to the
output "Phone Out" so "Table Mic 1" will not be heard by
the remote participants on "Phone Out".
Queries the mute status of the crosspoint from "Table Mic
1" to the output channel apos;Phone Out".
Argument value
Matrix
Floating-Point
Read/Write
Conferencing Mic/Line Input, Sound Reinforcement Mic/Line
Input, Analog Telephony Input, Signal Generator, Submix,
ConferenceLink Aux Input, ConferenceLink Raw Input
Mono
Conferencing Line Output, Sound Reinforcement Line
Output, Submix, ConferenceLink Aux Output
Stereo
Minimum: -1.0, Maximum: 1.0, Resolution: 0.01
0.0
No
No
Description
Sends the mono virtual channel "Phone In" to only the
right channel of the stereo virtual channel "Amplifier".
Matrix Crosspoint Pan