Executing A Transition; Transition Indicator Function - Sony DVS-9000 User Manual

Executing a Transition

There are two ways of executing a transition: as an auto transition by a button
operation, and as a manual transition using the fader lever. You can also use a
combination of these two modes.
For an overview of the auto transitions and manual transitions, see "Executing
a Transition" (page 33).

Transition Indicator Function

In each of the M/E and PGM/PST banks, to the left of the fader lever is a
transition indicator composed of 30 LEDs. This indicator shows the state of the
transition, whether auto or manual, by which LEDs are lit.
For example, in the illustration above, it can be seen that the transition is more
than half completed.
When the transition is completed, all of the LEDs go off.
Lit
Transition indicator
187

Executing a Transition