Paths - Sony DVS-9000 User Manual

Deletion position
Deletion between two
keyframes
Deletion of the last
keyframe
Delay setting
You can set the delay from the time of executing an operation to run the effect,
and the effect actually starting (that is, the delay until the first keyframe). You
can make this setting in the keyframe control block. (See "Time Settings" in
Chapter 13 (Volume 2).)
Note that changing the delay does not alter the duration of the effect.

Paths

The term "path" refers to the specification of how interpolation is carried out
from one keyframe to the next.
For details of the path setting procedure, see Chapter 13 "Path Settings"
(Volume 2).
Switcher path settings
Carry out path settings in the Key Frame menu.
For each menu, the following settings are available.
M/E-1 and P/P menus
Item
M/E1, P/P All
Change in effect duration
Keyframe deletion position and the change in effect duration
1 2 3
1 2 3
1 2 3
1 2 3
Paths that can be set
For each of M/E and PGM/PST, path settings
for the following items are made
simultaneously.
4
4
113
Keyframes