Basics Of Signal Selection; Bus Selection - Sony DVS-9000 User Manual

Basics of Signal Selection

The M/E bank, PGM/PST bank, and the auxiliary bus control block has cross-
point buttons.
These buttons are identified by numbers common to all of the banks, and a
signal is assigned to each number.
The basis of signal selection is to select, in a cross-point button row, the cross-
point button to which is assigned the desired signal.

Bus Selection

The key row is shared by multiple buses.
To assign a bus to the cross-point buttons in the auxiliary bus control block,
press one of the AUX delegation buttons to select the bus.
The following table illustrates the correspondence between buses and cross-
point button rows, and the delegation operations.
Bank
PGM/PST
18
Signal Selection
Bus name Cross-point
button row
Program bus Program row
Preset bus Preset row
DSK 1 bus Key row
DSK 2 bus
DSK 3 bus
DSK 4 bus
Utility 1 bus
Utility 2 bus
DME external video 1
bus
DME external video 2
bus
DME external video 3
bus
DME external video 4
bus
DME utility 1 bus
DME utility 2 bus
Delegation operation
Turn on the [DSK1] button
Turn on the [DSK2] button
Turn on the [DSK3] button
Turn on the [DSK4] button
Turn on the [UTIL1] button
Turn on the [UTIL2] button
Turn on the [DME1] button
Turn on the [DME2] button
Turn on the [DME3] button
Turn on the [DME4] button
Turn on the appropriate
buttons in accordance with
the signal assignment made
in the Setup menu.
a)
a)
a)
a)