Sony DVS-9000 User Manual page 256

1
2
To move the pattern from its current position to the center through
the course of a transition
Press [Auto Center] in the <Position> group, turning it on.
Rotating the wipe pattern (Rotation)
Use the following procedure.
1
2
256
Wipe Settings for Independent Key Transitions
Press [Position] in the Key1 Wipe Adjust menu, turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 Position H Horizontal position
2 Position V Vertical position
a) See page 51.
In the <Rotation> group of the Key1 Wipe Adjust menu, select the rotation
type.
Angle: Incline the pattern through a fixed angle.
Speed: Rotate at a speed rate.
Magnitude: Rotate the pattern through a fixed angle during the course of
the transition.
According to the selection in step 1, set the following parameters.
• When Angle is selected
Knob Parameter Adjustment
1 Angle Angle of pattern rotation
a) See page 51.
• When Speed is selected
Knob Parameter Adjustment
1 Speed Rotation rate of pattern
a) See page 52.
• When Magnitude is selected
Knob Parameter Adjustment
1 Angle Angle of pattern rotation at start of
transition
Setting values
a)
200.00 to 200.00
a)
200.00 to 200.00
Setting values
a)
100.00 to +100.00
Setting values
a)
100.00 to +100.00
Setting values
a)
100.00 to 100.00