Video Process Settings - Sony DVS-9000 User Manual

Video Process Settings

This section describes operations on the M/E-1 and PGM/PST background A
and B buses, and utility buses 1 and 2.
For these operations, use the Misc >Video Process menu in the respective
operating bank.
For video process settings on other buses, see the following.
This section describes an example on the background A bus of the M/E-1 bank.
For the background B bus or utility bus 1 or 2, make the adjustment with a
similar procedure.
Making video process settings for each bus
Use the following procedure.
1
2
3
292
Video Process Settings
• Settings for a particular input signal: "Signal input settings" in Chapter
16 (Volume 2)
• Key fill bus settings: "Video Processing" (page 223)
• Settings for frame memory source buses 1 and 2: "Setting video
processing" (page 269)
• Settings for Aux buses: "Making video process settings for an AUX bus"
(page 291)
• Overview of video process: "Video Process" (page 69)
In the menu control block, press the top menu selection button [M/E1] and
select VF7 'Misc' and HF2 'Video Process.'
In the <Bkgd-A> group, press [Video Process], turning it on.
Adjust the following parameters.
Knob Parameter
1 Video Gain
2 Y Gain
3 C Gain
4 Hue Delay
5 Black Level
To return the parameter settings to the defaults
Press [Unity] in the <Bkgd-A> group.
Adjustment
Video signal gain
Luminance signal gain
Chrominance signal gain
Hue delay
Black level
Setting values
200.00 to +200.00
200.00 to +200.00
200.00 to +200.00
180.00 to +180.00
7.30 to +109.58