Transition Preview - Sony DVS-9000 User Manual

background output is always from the background A bus. This is called "flip-
flop mode."
The alternative is known as "bus fixed mode," in which there is no bus
interchange. In this mode, when the fader lever is at the top of its travel the
output from the A bus is always 100%, and when the fader lever is at the bottom
of its travel the output from the B bus is 100%.
A
B
For details of fader lever operation in bus fixed mode, see page 195.

Transition preview

With the preview output of the M/E bank and PGM/PST bank, you can check
the effect of a transition in advance. To carry out a transition preview, press the
[TRANS PVW] button in the transition control block. (See "Transition
Preview" (page 196).)
Note
In multi-program mode, DSK mode (page 129) or bus fixed mode (page 33),
it is not possible to carry out a transition preview.
Pattern limit
When a wipe or DME wipe pattern is selected for the transition, you can
specify the range of movement of the wipe pattern through the course of the
transition, for each bank independently.
34
Transitions
BLACK
BLACK
Buttons lit
Flip-flop mode and bus fixed mode
Flip-flop mode
A
BLACK
B
BLACK
Bus fixed mode
Fader
lever
A
BLACK
B
BLACK