Sony DVS-9000 User Manual page 88

Production switcher system with center control panel
Hide thumbs Also See for DVS-9000:
Table of Contents

Advertisement

There are two modes: H&V and Size. You can set the size and frequency of
waves in the image, the wave form, the amount of wave movement, and the
range. In H&V mode, you can also set the wave angle.
Twist
Twists the image.
You can twist the image in the horizontal or vertical direction.
You can set the size and frequency of waves in the image, the wave form, the
amount of wave movement, and other parameters.
Ripple
Applies an effect like ripples moving across the image.
There are four modes: Radial, Angular, Both, and Shape. The direction of
modulation differs depending on the mode. You can set the size and frequency
of the ripples, their direction and speed, their center point, and other
parameters. In Shape mode, you can select ripple shapes other than circles
(stars, etc.).
Rings
Partitions the image into rings that rotate while moving in the same direction.
88
Digital Multi Effects (DME)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvs-9000sfCcp-9000 series

Table of Contents