Wipe Settings For Independent Key Transitions; Basic Procedure For Independent Key Transition Wipe Settings - Sony DVS-9000 User Manual

Wipe Settings for Independent Key
Transitions
You carry out independent key/downstream key transition wipe setting
operations using the Wipe Adjust menu for each keyer.
For an overview of independent key transitions, see page 26.
This section describes the independent key transition wipe settings, taking the
M/E-1>Key1>Transition>Wipe Adjust menu as an example.
Basic Procedure for Independent Key Transition Wipe
Settings
Accessing the independent key transition wipe settings menu
As an example, to access the M/E-1>Key1>Transition>Wipe Adjust menu,
carry out the following operation.
• In the menu control block, select the top menu selection button [M/E 1] and
select VF1 'Key1' and HF6 'Transition' to display the Transition menu for
key 1, then press [Wipe Adjust].
Carrying out the above operation displays the M/E-1>Key1>Transition>Wipe
Adjust menu (which will be referred to below as simply the Key1 Wipe Adjust
menu).
Selecting the independent key transition wipe pattern
You select the independent key wipe pattern from the list of patterns displayed
in the menu.
Note
In an independent key transition, you can only use the standard wipe patterns
(pattern numbers 1 to 24).
To select a wipe pattern for independent key1 on the M/E-1 bank, use the
following procedure.
1
254

Wipe Settings for Independent Key Transitions

In the Key1 Wipe Adjust menu, select [Pattern Select].
The Pattern Select menu appears.