Sony DVS-9000 User Manual page 230

Knob
4
a) In the "4H mode" and when [Fine Key] (page 214) is on, the setting value range is 0 to 4.
b) When a wipe pattern key or key wipe pattern key is selected as the key type
• Separate edge on
The outline width settings can be made independently for left, right, top, and
bottom sides. The separate edge function is only available when luminance
key, linear key, or chroma key is selected as the key type.
Knob
1
2
3
4
a) In the "4H mode" and when [Fine Key] (page 214) is on, the setting value range is 0 to 4.
When [Outline] is selected with separate edge on, the [MORE] button lights
amber. Pressing the [MORE] button to turn it green then allows you to adjust
the key fill density parameter with a knob.
Knob
4
Setting the embossing parameters
When the [EMBOS] button is lit green, adjust the following parameters.
Knob
1
2
4
To adjust the emboss fill color
When emboss is selected, the [MORE] button lights amber, and the number of
parameters that can be set increases. Press the [MORE] button, changing it
from amber to green, to adjust Matte1.
Knob
1
2
3
4
230
Key Setting Operations With the Key Control Block
Parameter Adjustment
Density Outline density
Parameter Adjustment
Top Top edge width
Left Left edge width
Right Right edge width
Bottom Bottom edge width
Parameter Adjustment
Density Outline density
Parameter Setting values
Width 0 to 4
Position 0 to 359
Density 0 to 100
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Density Density
Setting values
0 to 100
Setting values
a)
0 to 8
a)
0 to 8
a)
0 to 8
a)
0 to 8
Setting values
0 to 100
Setting values
0 to 100
0 to 100
0 to 359
0 to 100