Executing A Transition With The Fader Lever (Manual Transition) - Sony MVS-8000 User Manual

To execute a transition on the M/E or PGM/PST bank by a button operation,
use the following procedure in the transition control block.
To carry out an instantaneous cut transition: Press the [CUT] button.
To carry out a gradual transition: Press the [AUTO TRANS] button.
To complete a partially executed transition instantaneously: Press the
Executing a Transition With the Fader Lever (Manual
Transition)
Using the fader lever, you can manually control the progress of the transition.
Moving the fader lever from one end of its travel to the other completes the
transition.
To execute a manual transition with the transition control block fader lever, use
the following procedure.
To carry out the transition completely: Move the lever over the full range of
182
Executing a Transition
Fader lever
AUTO TRANS button
CUT button
Transition control block (standard type)
This executes the transition at the preset transition rate (see page 173).
While the transition is executing, the [AUTO TRANS] button lights
amber. When it completes the button goes off.
[CUT] button.
The [AUTO TRANS] button goes off.
its travel.