3
In the M/E-1>Wipe menu, select HF2 'Pattern Mix.'
The Pattern Mix menu appears.
4
In the <Pattern Mix> group, select the type of pattern mix.
Mix: mix
+Nam: positive Nam
–Nam: negative Nam
Morphing: morphing
For an overview of types of pattern mix, see page 47.
5
Depending on the selection in step 4, set the following parameters.
• When mix, positive Nam, or negative Nam is selected
Knob
1
• When morphing (see page 47) is selected
Knob
2
3
6
In the <Main/Sub Link> group, make the main/sub modifier link function
settings. (See "Main and sub modifier link function" (page 49).)
Full: full link mode
Semi: semi-link mode
Applying the effect of a diamond dust wipe to the selected
pattern (Dust mix)
Use the following procedure.
1
In the Pattern Mix menu, press [Dust Mix], turning it on.
2
Set the following parameters as required.
Knob
1
2
Parameter
Adjustment
Mix Ratio
Proportion of sub pattern to the
main pattern
Parameter
Adjustment
Start
Point in transition at which main
pattern is at 100%
End
Point in transition at which sub
pattern is at 100%
Parameter
Adjustment
Mix Ratio
Proportion of diamond dust
pattern in mix
H Size
Particle width
Setting values
0.00 to 100.00
Setting values
50.00 to 150.00
50.00 to 150.00
Setting values
0.00 to 100.00
0.00 to 100.00
Basic Procedure for Wipe Settings
241