Sony DVS-9000 User Manual page 250

Setting the wipe pattern replication (Multi)
You can set pattern replication independently for the main pattern and sub
pattern.
Use the following procedure.
1
2
3
4
5
Making a wipe pattern like a Venetian blind (Pairing)
Use the following procedure.
1
250
Basic Procedure for Wipe Settings
In the M/E-1> Wipe menu, select HF5 'Main Modify.'
The Main Modify menu appears.
Press the [Multi] button, turning it on.
Set the following parameters.
Knob Parameter Adjustment
1 H Multi Number of repetitions of pattern
horizontally
2 V Multi Number of repetitions of pattern
vertically
3 Shift Replication layout
a) See page 53.
To make more adjustments, press the [Multi Adjust] button.
The Multi Adjust menu appears.
Make the following settings, as required.
H Invert: When this is on, alternate tiles are inverted left-to-right.
V Invert: When this is on, alternate tiles are inverted top-to-bottom.
Non-Mask: When this is on, even if the positioner function is used to
move the pattern position, the pattern is always present on the screen.
Position: By adjusting the following parameters, move the pattern position
within the divisions determined in step 3.
Knob Parameter Adjustment
1 Position H Horizontal position of pattern
2 Position V Vertical position of pattern
a) See page 51.
In the M/E-1 > Wipe menu, select HF5 'Main Modify.'
The Main Modify menu appears.
Setting values
1 to 63
1 to 63
a)
100.00 to +100.00
Setting values
a)
200.00 to +200.00
a)
200.00 to +200.00