Executing An Auto Transition; Executing A Transition With The Fader Lever (Manual Transition) - Sony MVS-8000 User Manual

Executing an Auto Transition

To execute a transition on the M/E or PGM/PST bank by a button operation,
use the following procedure in the transition control block.
For an overview of the auto transition, see page 41.
To carry out an instantaneous cut transition: Press the [CUT] button.
To carry out a gradual transition: Press the [AUTO TRANS] button.
To complete a partially executed transition instantaneously: Press the
Executing a Transition With the Fader Lever (Manual
Transition)
To execute a manual transition with the transition control block fader lever, use
the following procedure.
For an overview of the manual transition, see page 41.
322
Executing a Transition
Fader lever
AUTO TRANS button
CUT button
This executes the transition at the preset transition rate (see page 316).
While the transition is executing, the [AUTO TRANS] button lights
amber. When it completes the button goes off.
[CUT] button.
The [AUTO TRANS] button goes off.
ON ON ON ON
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
BKBD KEY1 KEY2 KEY3
KEY SUPER
MIX NAM
PRIOR MIX
PST
ALL COLOR WIPE DME
MIX
PRIOR NORM
NORM REV
SET /REV
AUTO
TRANS
Transition control block
KEY4
TRANS
PVW
CUT
PTN LIMIT
KF
LIMIT SET