Saving And Recalling Setup Data - Sony DVS-9000 User Manual

Saving and Recalling Setup Data

Setup menu:
[Setup Define]
Non-volatile memory
User setup data
Updating the switcher or control panel setup data saves the updated setup data
in RAM in each device.
• In Resume mode (see page 124), even if devices are reset or powered off, the
data is preserved in RAM, and recalled when the power is turned back on.
• In Custom mode (see page 124), the user-defined settings (user setup data)
saved in non-volatile memory or factory default setup data held in ROM in
each device is recalled when a reset is made or the power is turned back on.
(See "Selecting the start up state (Start Up)" (page 124).)
126
Setup
Hard disk / memory card
User setup data
Load
File menu:
[Load]
Current setup data
(If in Resume mode, settings data is saved.)
Store
In Custom mode, power on
or reset
Concept of saving and recalling setup data
Note
The Resume mode cannot be used for DMEs and DCUs.
Save
File menu:
[Save]
RAM
ROM
Factory default setup data
Initialize
Setup
menu:
[All Clear]