Sony DVS-9000 User Manual page 239

The patterns from the selected pattern group appear on the screen.
For details of wipe patterns, see "Types of Wipe Pattern" (page 46) and
the appendix "Wipe Pattern List" (Volume 2).
3
Press the button to select the desired pattern.
4
The parameters change according to the selected pattern, and you can
adjust the pattern.
• When a polygon wipe is selected (pattern number 49)
Knob Parameter
1 No.
2 Star Rate
a) A value of –100.00 completely removes the star "rays," leaving a circle; at 100.00 the
"rays" are at their sharpest.
• When a mosaic wipe is selected (pattern numbers 200 to 203, 206 to
213, 224 to 247, 250 to 257, 260 to 269)
Knob Parameter
1 H Tile No.
2 V Tile No.
• When a karaoke wipe is selected (pattern numbers 220 to 223)
Knob Parameter
1 Start
2 Row No.
3 Phase
a) At 100.00 tiles appear from the top (or left edge) of the screen; at 100.00 from the
bottom (or right edge) of the screen.
b) At 100.00 all rows appear simultaneously; at 100.00 until one row of tiles is completely
displayed, the next row does not start to appear.
• When a random wipe is selected (pattern number 273)
Knob Parameter
1 H Size
2 V Size
3 Volatility
Adjustment
Number of points
Angularity of star
Adjustment
Number of tiles horizontally
Number of tiles vertically
Adjustment
Position of start tile
Number of rows of tiles
Delay for next row
Adjustment
Tile width
Tile height
Rate of tile generation
Basic Procedure for Wipe Settings
Setting values
3 to 64
a)
100.00 to 100.00
Setting values
2 to 36
2 to 18
Setting values
a)
100.00 to 100.00
1 to 36
b)
100.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
239