Key Edge Modifications - Sony DVS-9000 User Manual

Knob
1
2
3
4
Knob
1
2
3
4
When using the key fill bus signal: Press the [MATTE FILL] button, turning
it off. To select the key fill signal, use the key row in the cross-point control
block.
Selecting key source
• To use the key source paired with the key fill signal selected on the key fill
bus, press the [AUTO SEL] button, turning it on. The pairing of the cross-
point buttons for key fill and key source is carried out in the Setup menu. (See
"Cross-Point Settings (Xpt Assign Menu)" in Chapter 16 (Volume 2).)
• To select key source independently of the key fill signal selected on the key
fill bus and paired with key source, hold down the key delegation button
[KEY1], then press the desired button in the cross-point control block.
• To use as key source the same signal as the key fill signal selected on the key
fill bus, select the SELF mode by pressing the [AUTO SEL] button and
[SPLIT] button simultaneously so that both are off. When chroma key is
selected as the key type, select the SELF mode.

Key Edge Modifications

To apply a modification to the key edge, press one of the edge type selection
buttons in the key control block.
[BDR] button: border
[DROP BDR] button: drop border
[SHDW] button: shadow
[OUTLINE] button: outline
[EMBOS] button: emboss
When [Mix Color] is on, and the [MORE] button is lit amber
Parameter Adjustment
Luminance Color 1 luminance
Saturation Color 1 saturation
Hue Color 1 hue
Size Pattern size
When [Mix Color] is on, and the [MORE] button is lit green
Parameter Adjustment
Luminance Color 2 luminance
Saturation Color 2 saturation
Hue Color 2 hue
Soft Edge softness
Key Setting Operations With the Key Control Block
Setting values
0 to 100
0 to 100
0 to 359
0 to 100
Setting values
0 to 100
0 to 100
0 to 359
0 to 100
227