Sony DVS-9000 User Manual page 146

DME4 can be assigned to one keyer. A
DME channel assigned to a keyer cannot be
selected on another keyer. However, using
the override function it is possible to
allocate a channel already allocated to
another keyer to the currently selected
keyer. Using the trace function, it is
possible to check which keyer a DME
channel is allocated to.
j ON AIR indicators
These light red when the corresponding
DME channels are included in the final
program output.
k Output destination specification
buttons
MON (monitor): Hold down this button
and press the selection button for the
DME channel you want to assign to the
monitor output; you can then monitor
the output signal on the DME monitor
output.
While this button is held down, the
DME channel selection buttons light as
follows, allowing you to check the
monitor assignment.
Lit amber: DME channel that can
currently be assigned
Lit green: DME channel currently
assigned to the monitor output
FM FEED (frame memory feed):
PROC KEY (processed key): When this
button is on, the key fill/source signal
subjected to key processing or signal
subjected to a DME effect on the
currently selected keyer can be selected
as a reentry signal (PROC V or PROC
K) for the M/E or PGM/PST bank, on
the auxiliary bus or the like.
l OVERRIDE button
To select a DME channel already allocated
to another keyer or transition to the
currently selected keyer (or transition), hold
146
Names and Functions of Parts of the Control Panel
down this button, and press the DME
channel selection button.
m TRACE button
When a DME channel is already allocated
to another keyer or transition, hold down
this button, and press the corresponding
DME channel selection button, to switch to
the state in which the keyer (or transition) to
which the DME channel is allocated is
currently selected.
n AUTO DELEG (auto delegation)
button
When this button is on, the key delegation
selection state of the key control block is
linked to the key delegation selection state
of the independent key transition control
block.