Sony DVS-9000 User Manual page 153

PREV KF (previous keyframe): When
this button is pressed, the edit point
moves to the keyframe immediately
before the current time (the position
where the effect is currently stopped).
NEXT KF (next keyframe): When this
button is pressed, the edit point moves
to the keyframe immediately after the
current time.
c Editing buttons
FROM TO: Press this button, turning it on,
to enter numeric values from the
numeric keypad control block, and
select a specified range of keyframes.
INS (insert): When this button is pressed, a
new keyframe is inserted after the
current keyframe. Pressing this button
while holding down the [SHIFT]
button inserts a new keyframe before
the current keyframe.
MOD (modify): When this button is
pressed, the selected keyframe is
modified with the values of the current
keyframe. When the edit point is
between two keyframes, the
immediately preceding keyframe is
modified. You can also select multiple
keyframes, and modify them in a single
operation. At this time, pressing this
button while holding down the
[SHIFT] button modifies all selected
keyframes with the changed values
taken as relative values.
DEL (delete): When this button is pressed,
the selected keyframe is deleted. When
the edit point is between two
keyframes, the immediately preceding
keyframe is deleted. You can also
select multiple keyframes, and delete
them in a single operation.
COPY: When this button is pressed, the
selected keyframe is copied. You can
also select multiple keyframes, and
copy them in a single operation.
PASTE: When this button is pressed, the
deleted or copied keyframe is inserted
after the current keyframe. Pressing
this button while holding down the
[SHIFT] button inserts the deleted or
copied keyframe before the current
keyframe.
SHIFT: Hold down this button, and press
the [INS] button, [MOD] button, or
[PASTE] button, to obtain the shifted
function for the button.
UNDO: When this button is pressed, the
last executed keyframe insertion,
modification, or deletion, or paste
operation is canceled.
d Duration setting buttons
KF DUR (keyframe duration): Press this
button, turning it on, to set the
keyframe duration of the selected
keyframe, by numeric value entry from
the numeric keypad control block.
EFF DUR (effect duration): Press this
button, turning it on, to set the effect
duration from the numeric keypad
control block.
DELAY: Press this button, turning it on, to
enter a delay value from the numeric
keypad control block.
CONST DUR (constant duration): Select
the duration mode. When this is lit, the
mode is constant duration mode, and
when off, variable duration mode.
e KF LOOP (keyframe loop) button
f PAUSE button
When this button is pressed, a pause is
applied to the selected keyframe.
g Effect execution section
RUN: When this button is pressed, the
effect is run from the first keyframe to
the last keyframe. However, if a pause
is set on a keyframe, the effect stops at
that point. Press this button again to
Names and Functions of Parts of the Control Panel
153