Auxiliary Bus Control Block - Sony DVS-9000 User Manual

Auxiliary Bus Control Block

SNAP
EFF
SHOT
SHOT
MCRO
BOX
TRANS
RATE
M/E
P/P
1
AUX AUX
1 2
2 Bank selection buttons
a AUX delegation buttons
Press one of these buttons, turning it on, to
select the bus to assign to the key row of the
bank selected with the bank selection
buttons.
The buses that can be selected are as
follows.
• AUX buses 1 to 17
• FMS 1 (frame memory source 1) and
FMS 2 buses
• EDIT PVW (preview) bus
To select AUX8 to AUX17, use the
[SHIFT] button.
For each bank, the key row is shared
between the AUX bus control block and
cross-point control block. Priority is given
to the control block in which the delegation
button is last pressed.
MASTR ALL UNDO
STORE
M/E USER USER
P/P
STATS
1 1 2
DME DME DME DME
STORE
1 2 3 4
RCALL
P-BUS GP1
AUX AUX AUX AUX AUX
3 4 5 6 7
1 AUX delegation buttons
+/-
8 9
7 EFF
DISS
CLR
4 5 6 AUTO
TRANS
TRIM
1 2 3
GPI
ENBL
0
ENTER
FMS FMS EDIT
KEY
1 2 PVW
3 KEY button
b Bank selection buttons
These select the bank for which the AUX
delegation buttons are enabled.
c KEY button
While this button is held down, you can use
the cross-point row of buttons to select key
signals.
d SHIFT button
While this button is enabled, the shifted
signal names appear in the source name
display. Pressing this buttons toggles the
source name display between the shifted
signal names and unshifted signal names.
Names and Functions of Parts of the Control Panel
SHIFT
4 SHIFT button
157