Interpolation; Global Effects - Sony DVS-9000 User Manual

Invert
Inverts the input video signal and/or key signal horizontally or vertically. You
can make separate settings for the front and back.
Horizontal inversion

Interpolation

Specifies the methods used for interpolation processing of input video signals
and input key signals.
For input video signals, you can select from the following four methods.
• Detect changes in the luminance and chrominance signals separately, and
switch automatically between fields and frames. You can select the degree of
change detection.
• Detect changes in the luminance signal separately, and switch automatically
between fields and frames. You can select the degree of change detection.
• Do interpolation in field units.
• Do interpolation in frame units.
For input key signals, you can select from the following three methods.
• Detect changes in the luminance signal separately, and switch automatically
between fields and frames. You can select the degree of change detection.
• Do interpolation in field units.
• Do interpolation in frame units.
You can also select the number of pixels used in interpolation processing, and
select the method used to show the picture reduced or expanded.

Global Effects

Global effects are special effects created by combining the images of
successive channels. The Global Effect menu is used to add these effects.
Input signal
Inversion of input signal
Vertical inversion
Digital Multi Effects (DME)
97