Basic Operating Procedure - Sony DVS-9000 User Manual

Basic Operating Procedure

The positions of the principal buttons used for basic transition operation are as
follows.
For basic transition operations, use the following procedure.
1
2
176

Basic Operating Procedure

Next transition
selection buttons
Transition type
selection buttons
Transition execution
section
In the cross-point control block, select the background video with the
background A row of cross-point buttons.
Select the way in which the transition will affect the image, using the next
transition selection buttons in the transition control block.
For an overview, see "Selecting the Next Transition" (page 23).
To change the background: Press the [BKGD] button, turning it on.
To insert or delete a key: Press one of the [KEY1] to [KEY4] buttons (or
[DSK1] to [DSK4] buttons in the PGM/PST bank), turning it on.
To enable the key priority setting, which determines the key overlay
order after the transition: Press the [KEY PRIOR] button, turning it
on.
You can press more than one button at the same time.
ON ON ON ON
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
BKBD KEY1 KEY2 KEY3
KEY SUPER
MIX NAM
PRIOR MIX
PST
COLOR
ALL WIPE DME
MIX
PRIOR NORM
NORM REV
SET /REV
AUTO
TRANS
Transition control block
KEY4
TRANS
PVW
CUT
PTN LIMIT
KF
LIMIT SET