Simple Connection To Mks-8080/8082 Aux Bus Remote Panel - Sony DVS-9000 User Manual

Parallel port settings (Parallel Tally)
Make the parallel port settings for output of tally information pertaining to
sources and destinations.
For each of the tally output terminal numbers, specify the tally type, and source
address or destination level and address.
Simple Connection to MKS-8080/8082 AUX Bus Remote
Panel (Option)
To connect the MKS-8080/8082 AUX Bus Remote Panel to a CCP-9000
Center Control Panel using an S-BUS data link requires a BKPF-R70A
Routing Switcher Controller Board or similar primary station and various
settings for connection.
However, using a simple connection, the need for an S-BUS data link primary
station is avoided, and direct connection to the MKS-8080/8082 is possible.
A simple connection is possible if the following conditions are met:
• There are no devices other than the CCP-9000 and MKS-8080/8082
connected on the S-BUS data link.
• There are no more than sixteen MKS-8080/8082 units connected on the S-
BUS data link.
For details of the connection procedure, see "Procedure for Simple
Connection" in Chapter 16 (Volume 2).
133
Setup