Table of Contents
Advertisement
Chapter 2: Setting Up Your System
Connecting the Hardware
Connecting the Hardware
The software must be installed before you install the hardware. If your system
includes 86154A option 010, a laptop computer, or 86154A option 030, a pen
tablet computer, the software was factory-installed. Otherwise, refer to
Chapter 1, "Installing the Software"
Table 2-1
combination systems with most types of GPS. If you have a GPS that is not
listed, use
to the pin-out illustration
page
Table 2-1 GPS System Configurations
.
If You Have This
Trimble Placer GPS/DR
Trimble Placer GPS 455
Trimble Placer 455 & Differential
Trimble Placer GPS 455 with
Dead Reckoning
Internal GPS & Differential
Trimble Placer GPS 400 or
SVeeSix
NOTE
Your system can be configured using either Agilent Technologies supplied
options or customer-supplied components.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
directs you to the configuration instructions for receiver, phone, and
Table 2-1
to find the one that most resembles your own. Also refer
"RS-232 to GPS Unit Cable Configuration" on
2-92.
with Receiver
Only
page 2-10
page 2-18
page 2-22
page 2-28
page 2-26
page 2-14
for instructions.
with Phone Only
with Receiver
and Phone
page 2-54
page 2-32
page 2-62
page 2-40
page 2-66
page 2-44
page 2-70
page 2-50
page 2-48
page 2-58
page 2-36
Wireless Solutions Getting Started Guide 2-7
Advertisement
Table of Contents
