Table of Contents
Advertisement
Chapter 2: Setting Up Your System
What You'll Find in This Chapter
What You'll Find in This Chapter
To Do This
Connect the hardware
Configure hardware automatically.
Configure internal GPS.
Configure multiple receivers and/or multiple
phones.
Review receiver connection panels and
connectors.
Set pin-out specifications for serial port
connection.
Configure other GPS units.
Set pin-out specifications for connecting
differential GPS receiver to a receiver with an
internal GPS.
NOTE
Trimble provides downloadable documentation on the Web. At the time of
this printing, you can find the files (Microsoft Word and PDF formats) at
http://www.trimble.com/mpc/placer/download/manuals.htm.
URL has changed, use the search facility provided at the Web site
(www.trimble.com). For further information about support and training, you
can contact Trimble at a phone number on their Web site.
2-2 Wireless Solutions Getting Started Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
See This
"Hardware Installation Tips" on page 2-3
important setup information.
"Connecting the Hardware" on page 2-7
setup of all types of systems. Refer to this page
for the pages that cover your particular system.
"Automatic Configuration" on page 2-5
"Internal GPS & Internal GPS with Differential
Setup" on page 2-26
"Configuring Multiple Receivers and Phones" on
page 2-74
"Universal Serial Bus (USB), 4-port Adapter
Configuration" on page 2-87
"Receiver to PC Serial Port Cable Configuration"
on page 2-91
"RS-232 to GPS Unit Cable Configuration" on
page 2-92
"RS-232 to Differential Unit Cable Configuration"
on page 2-93
covers
covers
If the
Advertisement
Table of Contents
