Table of Contents
Advertisement
Chapter 2: Setting Up Your System
Internal GPS Receiver Connector Panel
Internal GPS Receiver Connector Panel
The receiver provides an internal GPS as identified in the application.
Make all connections before applying power. The default serial port used by
the application is COM1. If desired, you can specify a different serial port in
the application.
When the receiver is turned on, the
indicator is lighted. The light will
ACTIVE
turn off for 1-2 seconds during the software start up and configuration
process.
Once the receiver is turned on and the GPS antenna is properly placed, the
GPS is functional; however it may take several minutes to acquire GPS lock.
Figure 2-29 The Agilent Digital Receiver with Internal GPS, Connector Panel
2-90 Wireless Solutions Getting Started Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
