Table of Contents
Advertisement
Chapter 5: Solving Problems and Updating Your System
Troubleshooting Resource Problems, COM Errors and GPS Problems
While this application utilizes system resources, it provides a way of
determining when the system is running low on available resources. Opening
new windows with less than 20% remaining resources in any of the three
categories could cause Windows 95/98 to overrun its resources.
One solution for increasing the potential number of measurements made in a
given project without exceeding Windows 95/98 resources is to configure the
measurement with the associated virtual front panel turned off. You will be
able to record the data but not display it. This can be done in Configuration
mode, under the Display/Logging tab found under the Measurement tab.
The only solution for increasing the number of windows available during a
measurement is to use Windows NT. It does not have the same systems
resource limitations as Windows 95/98.
NOTE
While using option 160, real time mapping, operating with a 256-color
display setting may cause erratic behavior or memory problems. Adjust your
color display to High Color (16 bit) or higher.
COM Errors
The following procedure is suggested for locating and eliminating COM
errors when using the Agilent Wireless Solutions system.
•
NOTES
•
5-4 Wireless Solutions Getting Started Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To ensure that hardware is configured correctly, it is highly recommended
that you use the Automatic Configuration Wizard for setting up your
projects. for more information on the auto-configure process,
"Automatic Configuration" on page 2-5
You must create the verification tests in chapter 4 as projects prior to
troubleshooting COM errors.
refer to
Advertisement
Table of Contents
