Table of Contents
Advertisement
Chapter 2: Setting Up Your System
Receiver-Based System Setup
Receiver-Based System Setup
Trimble Placer GPS/DR
The setup for the Trimble Placer GPS/DR receiver is shown in
Figure
2-4.
When connecting your system with a Trimble Placer GPS/DR receiver, the
86154A option 211 (adapter cable) is required.
Before you begin the hardware installation procedure, please review
"Hardware Installation Tips" on page
2-3.
Figure 2-4 Trimble Placer GPS/DR
2-10 Wireless Solutions Getting Started Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
Table of Contents
