Operator Controls And Display Elements - Siemens SIMATIC S7-1500 Manual

Product overview

3.3 Operator controls and display elements

3.3 Operator controls and display elements
The following figure shows the operator control and display elements of the TM NPU
technology module.
①
②
③
④
⑤
⑥
⑦
Figure 3-2
The location of the interfaces and the pin assignment of the external power supply is
described in the section Terminal assignment (Page 13).
10
RUN, ERROR and MAINTENANCE LEDs
Slot for the SIMATIC memory card
LINK: LED display for the Ethernet interface port
PWR: LED display for external 24 V DC supply voltage
USB 3.1 interface
Gigabit Ethernet interface
Connection for external 24 V DC supply voltage
Operator controls and display elements
Technology Module TM NPU
Equipment Manual, 09/2020, A5E46384784-AA