Changes In This Manual; Converter With Cu230P-2 Control Units Operating Instructions, 04/2015, Fw V4.7 Sp3, A5E34257946B Ab - Siemens SINAMICS G120 Operating Instructions Manual

Changes in this manual

Changes with respect to the Manual, Edition 04/2014
New hardware
New PM240-2, FSD ... FSE Power Modules
Revised PM230 Power Module with new Article numbers
supported:
•
•
New functions in firmware V4.7 SP3
When using PM240, PM240-2 and PM330 Power Modules:
Application classes "Standard drive control" and "Dynamic
drive control" to simplify setting the motor control.
PM330 Power Module, frame size HX is supported
Reluctance motors are supported
Automatic setting of the PID technology controller (autotun-
ing)
The sign of the system deviation for the additional, free
technology controller can be switched over.
A new parameter defines the sign of the system deviation
matching the particular application, e.g. for cooling or heat-
ing applications.
Temperature sensors extended to include DIN-Ni1000 for
analog inputs AI 2 and AI 3.
Automatic switchover of the real time clock from daylight
saving time (summer time) to standard time (winter time).
Load torque monitoring extended to include the following
functions:
•
•
Line contactor control using a digital output of the inverter to
save energy when the motor is switched off
Improved motor data identification for PM330 Power Mod-
ules
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB
IP55 degree of protection: 6SL3223-0DE . . - . . G .
IP20 degree of protection and Push Through: 6SL321 . -
1NE . . - . . G .
Protection against blocking, leakage and dry running
operation in pump applications
Protection against blocking and broken belts in fan appli-
cations
In Chapter
Power Modules in degree of protection
IP20 and with push-through system
(Page 28)
Installing Power Modules (Page 56)
Technical data, PM240-2 (Page 388)
In Chapter
Starting basic commissioning
(Page 127)
Commissioning (Page 115)
Motor control (Page 219)
Power Module (Page 28)
Motor series that are supported
(Page 45)
PID technology controller (Page 266)
Free technology controllers
(Page 271)
Analog inputs (Page 159)
Real time clock (RTC) (Page 281)
System protection (Page 273)
Line contactor control (Page 264)
Setting is not required for the user
5