Siemens SINAMICS G120 Operating Instructions Manual page 165

For more information, please see the parameter list and the function block diagrams 2261 of
the List Manual.
Defining the function of an analog output - example
Advanced settings
You can manipulate the signal that you output via an analog output, as follows:
● Absolute-value generation of the signal (p0775)
● Signal inversion (p0782)
Additional information is provided in the parameter list of the List Manual.
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB
To output the inverter output current via analog output 0, you
must interconnect AO 0 with the signal for the output current:
Set p0771 = 27.
Advanced commissioning
6.2 Inverter control
165