Siemens SINAMICS G120 Operating Instructions Manual page 317
Low voltage converters, chassis and wall/panel mounted devices with cu230p-2 control units
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
Proceed as follows to transfer the settings from a memory card to the inverter
1.
2.
3.
4.
5.
6.
7.
8.
9.
You have transferred the settings from the memory card to the inverter.
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB
If a USB cable is inserted in the inverter, withdraw it.
Go to the menu level "OPTIONS".
In the "OPTIONS" menu, select "FROM CRD".
Set the number of your data backup. You can back up 99 different
settings on the memory card.
Start data transfer with OK.
Wait until the inverter has transferred the settings from the memory
card.
Switch off the inverter power supply.
Wait until all LEDs on the inverter are dark.
Switch on the inverter power supply again.
Backing up data and series commissioning
7.1 Backing up and transferring settings using a memory card
317
Advertisement
Table of Contents
