Siemens SINAMICS G120 Operating Instructions Manual page 312

Low voltage converters, chassis and wall/panel mounted devices with cu230p-2 control units

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Backing up data and series commissioning

7.1 Backing up and transferring settings using a memory card

Manually backing up

Preconditions

• The inverter power supply has been switched on.

• No memory card is inserted in the inverter.

Procedure with STARTER

Proceed as follows to back up your settings on a memory card:

1. Go online.

2. Press the "Copy RAM to ROM" button

3. In your drive, select "Drive Navigator".

4. Select the "Commissioning" button.

Converter with CU230P-2 Control Units

Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB

Sinamics g120c Sinamics g120p