Commissioning; Commissioning Guidelines - Siemens SINAMICS G120 Operating Instructions Manual

Commissioning

5.1

Commissioning guidelines

Overview
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB
1. Define the requirements of your
application placed on the drive.
→ (Page 116) .
2. Reset the inverter when
required to the factory setting.
→ (Page 148) .
3. Check whether the factory
setting of the inverter is already
sufficient for your application.
4. When commissioning the drive,
set the following:
– The closed-loop motor
control
– The inputs and outputs
– The fieldbus interface
5. When required, adapt the drive
→ (Page 151).
6. Back up your settings
→ (Page 309).
5
115