Ryobi 3302H Operation Manual page 87

Operation Procedures
The basic printing procedures when printing on paper with a size of 310 x 440 mm (12.20 x 17 .32") and a thickness of
0.1 mm (0.004") will be explained.
1. Plate Making
If the image position is incorrect, more time and work will be required for the vertical and
diagonal image adjustment before printing. Reproduce the image accurately to assure efficient
registration operation.
485mm
(19.09")
I·
(Leading edge)
T22 mm (0.87")
,....-------------,- - · j
~
Printing start line
Max. printing area
330x438 mm
(12.99
X
17.24")
335 mm
---~
..
~~
(13.19")
Before doing the punch processing, first match the
graduation of the RP22 register punch scale ( 1) with
the I>late width. Then set the plate on the RP22 and
punch the holes.
(Reference) For higher efficiency and more accurate punch processing, we recommend using
the RP520-220F register punch.
Operation Edition - 1