Ryobi 3302H Operation Manual page 66

Chapter 2 Names and Functions
2) Feeder
A. Suction feet
They pick up the sheet of paper and feed it to the
pull-out rollers.
B. Sheet separator
This prevents double sheet feeding.
C.
[]fJ
Vacuum control knob
This knob is for controlling the vacuum of the suction
feet.
D. Pull-out roller
This roller feeds the paper sent out by the suction
feet onto the feeder board.
E. Static eliminator
This is used to prevent poor paper feed caused by
electrostatic that is generated on the paper during
the printing.
The static eliminator will automatically go ON or
OFF when the pump turns ON or OFF.
Introduction Edition - 28
F.
!rn
Blower control knob
This knob is for controlling the blower volume from
the blower nozzles (1) and (2).
G. Auxiliary side blower control knob
This knob is for controlling the blower volume from
the blower nozzle (3).