Returning To The Ink Fountain Key 0 Point - Ryobi 3302H Operation Manual

Chapter 1 RYOBI PCS-F
5. Returning to the Ink Fountain Key 0 Point
The ink fountain key opening volume on the unit selected by using the unit selection button can be returned to "0" by
using the ink fountain key 0 point reset button.
1
0
8-ERo_E_I;::::=1======2=====3======4
=="'===5=====6=====0==7=====0a~~ ~~~
UNITOA
0 0 0 0 0 .
K L M
F
~; ~:L-rn-~-rn--rn--rn-:--rn-:--rn-:--rn- 0
_ _
r n __, ~~~
1 2 .3
~~-O[L_oc_K)G~''L[E=sc~)o
__
~l=l=======p========I~I~[Y=Es~JQ~[N=o~JIL-~:~-~~A_~~Ac~
1. Check that each button (H through M) on the ink fountain preset panel is OFF.
2. Push the ink fountain key 0 point reset button (E).
I
ALL INK KEYS ARE CLOSED. SELECT UNIT
3. Select the unit that you want to return the ink fountain key opening volume to "0" by using the unit selection button.
(At this time, you can select both the first and second units.)
ALL SELECTED INK KEYS ARE CLOSED
YES OR NO
4. Push the~ button to return the ink fountain keys on the selected unit to "0" in order automatically. At this time, the
following message is indicated on the message display (P).
ALL NO.* UNIT INK KEYS ARE CLOSED
WAIT A MINUTE
5. When completed, the ink fountain key 0 point reset button (E) lamp will go off automatically.
Optional Accessories Edition - 13