Delivery Section - Ryobi 3302H Operation Manual

2-9 Delivery Section
1) Delivery guides
H
A. Side jogger
This guide jogs to even up the side of the printed
sheets delivered onto the delivery table dolly.
B. Paper drop
This drops the printed sheet of paper onto the delivery
pile after it is released by the delivery grippers.
C. Delivery jam detector
When a delivery jam occurs, it will stop the press.
After removing the paper, the press can be run again.
D. Back guide
This is the jogger guide that is used to align the
vertical position of the sheets delivered.
E. Back guide set knob
This knob is used to set the back guide position.
F. Delivery table dolly crank handle
This handle is used to raise or lower the delivery
table dolly.
G. Side guide
This is the fixed guide that is used to set the lateral
position of the sheets delivered.
B
Chapter 2 Names and Functions
H. Front guide
This is the fixed guide that is used to align the leading
edge of the sheets delivered.
I. Delivery table dolly
The delivered sheets of paper are piled on this dolly.
J.
Delivery pile lowering sensor
This sensor detects the height of the delivered sheets.
When the pile reaches the specified height, the
delivery table dolly is lowered automatically.
K. Delivery table dolly lower limit switch
When the delivery table dolly is fully lowered, this
switch will actuate and the paper feed will stop
automatically.
Introduction Edition- 39