Ryobi 3302H Operation Manual page 261

3. Change of the ink fountain
I
Optional Accessories Edition - 20
I
Chapter 1 RYOBI PCS-F
1-4 Operation Procedures
I
9. Setting the Ink Section
I
1) Set the ink fountain.
A
CAUTION
Stop the press before setting. Failure to follow this instruction may result in an injury.
A
WARNING
Close the cover opened after setting. Failure to follow this
instruction may result in a serious injury.
Open the non operation side cover and shift the ink form roller release
lever ( 1) in the direction of the arrow ( ~, ~position).
After shifting the lever, close the cover opened.
Push the ink fountain
(1)
against the ink fountain roller and put the fixing
knobs (2) into the brackets. Then tighten the knobs to fix the ink fountain.
«NOTICE»
When turning the ink fountain roller with no ink in the ink fountain, the
ink fountain roller may be damaged, therefore please be careful.
«NOTICE»
Before setting the ink fountain, wipe off any foreign particles in the ink
fountain and on the ink fountain roller. Apply oil on the side edges of
the ink fountain. This oiling assures smooth fountain roller rotation.
Failure to follow this instruction may result in damage to wearing out of
the side edges of the ink fountain and ink fountain roller.
3