Ryobi 3302H Operation Manual page 52

Chapter 2 Names and Functions
I
Counter paneL!
A
~~~~
I
B
I
D
~~~~~
A. Sheet counter
It shows the number of sheets printed.
(Additional type)
B. Set counter
In the preset repeat counter mode, it indicates the
set number of sheets to be printed.
In the batch separation mode, it indicates the
number of sheets per batch and during the printing,
the indicated number will be subtracted.
C.
~
Counter set button
When pushing any one of the buttons, the number
indicated on the set counter will change. Push each
button to set the number of printed sheets or batch
number of sheets required.
When pushing both side set buttons at the same time,
the set counter indication will be reset to "0".
D.
~
Counter clear button
When pushing this button, the sheet counter
indication will be reset to "0".
Introduction Edition- 14
c
E.
[t6]
Count ON/OFF button
When pushing this button, the lamp will light and
the count will start.
When pushing this button again, the lamp will go
off and the count will stop.
F.
I±J
Mode selection button
To select the preset repeat counter mode (The lamp
is OFF.) or batch separation mode (The lamp is
ON.), push this button.
In the preset repeat counter mode, when the
number indicated on the sheet counter display
matches the number on the set counter display, the
buzzer sounds and the paper feed will stop.
In the batch separation mode, when the number on
the set counter display indicates "20" and "0", the
buzzer sounds.