Chapter 1 Operation Procedures
I!::::::=D=o=~=
A
Operation Edition - 20
When pushing the plate load button, the starting
buzzer sounds. After the buzzer sounds, push the
button again. The press will start to crawl and stop
automatically at the plate mounting position.
After that, the buzzer sounds.
Open the safety cover and insert and contact the plate
onto the positioning pins
(1)
on the leading edge
clamp.
<First unit>
Contact the plate tail edge on the plate tail edge
stoppers (2). Adjust the plate position so that the
"A" part has the same curve on both sides.
<Second unit>
Contact the plate tail edge on the plate tail edge
stoppers (1). Adjust the side position using the side
plate (2) so that the "A" part has the same curve
on both sides.